Products

Navigation

PAC-BUTTV
BUTTERFLY VALVES

Download Sheet   Enquire Now

PAC-BUTTV Butterfly Valve for Control, Throttling and Shut-off Duties.

PAC-BUTTV Valves are used extensively where corrosive, abrasive, and toxic media need to be reliably controlled. They are typically used for accurate control, throttling, and shut-off duties in a wide range of industries, including chemical, petrochemical, chlorine, paper, electro-plating, and more. Pacseal® butterfly valves offer reduced maintenance requirements and increased operational reliability.

  • Provide accurate control
  • Offer reduced maintenance
  • Increase operational reliability

  • 2in / DN 50 up to 24in / DN 600
  • ASME B16.5 class 150 lbs. (design RF/FF)
  • EN 1092 PN 10/16 (Design A/B) (Available upon request)
  • ISO 5752 Table 5 short
  • ASME B16.10 - 2in / 5.08 cm to 12in / 30.48 cm Table Narrow; 14in / 35.56 cm to 24in / 60.96 cm Table Wide
  • DIN EN 558-1 GR 20
  • MSS-SP 67: 2in / 5.08 cm to 12 in / 30.48 cm Table Narrow; 14in / 35.56 cm to 24in / 60.96 cm Table Wide
  • API 609: 2in /5.08 cm to 12in / 30.48 cm Category A; 14in / 35.56 cm to 24 in / 60.96 cm Category B
  • DIN/EN 12516 T2 (DIN 3840)
  • Tested within the scope of the inspection body designate by Module H1
  • 2in to 12in / DN 50 to DN 300: 232 psi / 16 bar (depending on operating temperature)
  • above 12" / DN 300: 145 psi / 10 bar (depending on operating temperature)
  • EN 12266 P10
  • EN 12266 P11
  • EN 12266 P12 Leak rate A
  • Wafer and Lug design with long neck for insulation
  • Up to 1 mbar abs. (depending on size and temperature)
  • -40°F / -40°C up to 392°F / 200°C (depending on material)
  • EN ISO 5211
  • NF E 29-402
  • PTFE
  • Abrasive PTFE
  • Antistatic PTFE
  • UHMWPE

  • Chemical
  • Petrochemical
  • Chlorine
  • Paper
  • Electro-plating